CORTEC VpCI Anti Corrosion/Rust/Oxidation Inhibitor Prevent 10" x 10" x 20" Bags

Description

Cortec VpCI Anti Corrosion/Rust/Oxidation Inhibitor Preventative 10" x 10" x 20" Bags 4mil (0.004"), VCI VpCI-126 Blue  USA!!
Made in the USA by Cortec these are Vapor Phase Corrosion Inhibitor bags which are heat sealable and made of tough 4 mil poly.  All bags are marked by Cortec, they are Blue 126.  These are ideal for anything that you would like to protect and have been approved for aviation parts meeting Mil spec
MIL-PRF-22019D
.  They are transparent.  They protect multi-metals.  These are commonly used for shipping parts overseas where moisture and salt air is present.  Also greatr for machine tooling, valves, tools, aviation and race parts, electrical and electronics.  It does not leave a film that has to be removed, the parts can be used with no cleaning.  We pack just about everything in them.  The size is 10" x 10" x 20".  They are recyclable.  We have a lot of this size and few other sizes that we will list shortly.
Thanks for looking!!
More Effective Corrosion Inhibitors Health, safety, and pollution control. Cortec’s formulations, using the newest chemical technology available, help alleviate your concerns in the areas of health, safety, flammability, and pollution control.
Multimetal protection. A full range of corrosion inhibitors are available to protect ferrous and non-ferrous metals, including formulations that protect combinations of metals.
Short-term and long-term protection. There’s a Cortec® solution for temporary protection during in-plant processing, medium-term protection for shipment and storage, or extended protection for lay-up, mothballing, and field service.
For a variety of environmental conditions. Now you can effectively protect your metals and products against corrosion from all aggressive atmospheres.
Protected parts are immediately ready for use. The protective invisible layer deposited by Cortec® Vapor phase Corrosion Inhibitors (VpCI®) needs no removal. No degreasing, scraping, cleaning, or further preparation is necessary before processing, installation, or use. Your VpCI® protected components, parts, and finished assemblies are ready for immediate use. Cortec’s barrier coatings are easily removed with conventional cleaning methods.
Does not alter most material properties. In the majority of cases, the invisible protective ionic layer of Cortec’ s VpCIs does not alter important surface properties. This is true even for the most precision electronic devices where conductivity, permittivity, and dimensional tolerances are crucial.
For tiny electronic devices to tanker holds. Cortec’ s VpCI®/MCI® technology protects any size products — from printed circuit board components during process, stored parts to large containerized shipments.
VpCIs are compatible with many synergistic fluids, coatings, and technologies. VpCI®/MCI® technology can be integrated into nearly every process.
How Cortec® VpCI® Works
• Vaporizes:
• Conditions enclosed atmosphere with a protective vapor.
• Vapor condenses on all metal surfaces.
• Ions dissolve in moisture layer (water electrolyte).
• Protective ions are attracted to metal surfaces.
• Ions form a thin molecular protective layer at the metal surface.
• Protective layer re-heals and self-replenishes through further condensation of the vapor.
• VpCI® combines with other functional properties. Antistatic, Lubricating, Cleaning, Paint Removing, Desiccant, Polymeric, Coatings, Rust Removing, Fire Retarding.
More Efficient Delivery Systems Cortec’s delivery systems offer practical, economical breakthroughs for the protection of metal parts and products, with innovative use of VpCI®/MCI® technologies.
Cortec® VpCI®/MCI® products are uniquely formulated for each type of delivery system.
Whether liquid, powder, impregnated foam, or plastic, VpCI®/MCI® formulations use technology to its best advantage for effective and economical corrosion protection.
The creative use of VpCI®/MCI® technology offers improved protection even for conventional applications.
Add, Dip, Inject, Package, Attach, Dispense, Insert, Roll-on, Automatic dispense, Electronic spray, Migrate, Wrap, Brush, Fog
From packaged products stored indoors to products located outdoors in adverse conditions, the new generation VpCI®/MCI® technology makes it more profitable to solve a corrosion problem than to ignore it.
For example, you can:
• Fog a heat exchanger in a few minutes and eliminate your shipping and storage corrosion problems.
• Protect on-site, operational electric circuitry for pennies a day.
• Easily spray valve flanges and stems with an outdoor coating for extended protection.
• Boost the protection of your lubricating oils with an additive effective for multimetal systems.
These four examples show how Cortec’s VpCI®/MCI® technology successfully solves problems caused by impractical conventional corrosion treatments.
How Cortec® VpCI®/MCI® Cuts Cost Use Cortec® technology in each stage of the product’s lifecycle, starting from the production of metal stock to actual use in the field.
When properly applied, Cortec’s VpCI®/MCI® technology substantially cuts time and cost throughout the entire product life cycle: manufacturing, storage, shipping, and field service.
Cortec’s VpCI®/MCI® products eliminate the extra processing steps such as cleaning, degreasing, rust removal, pickling, sandblasting, and reprotecting.
You will have less re-work, fewer rejects, improved quality, reduced rust claims, and extended equipment life.
NOTE:  If you are sending us an important message about your purchase in Paypal it is very easy to be overlooked.
To ensure your note/request is received PLEASE follow-up with an eBay message
.
We ship so quickly that if you requested overnight shipping in Paypal we may have already have shipped it with some other method before the Paypal message is read.   Sorry for the inconvenience but a small note on the bottom of a Paypal notification for an important request can be missed and we want to ensure that we provide the best service possible to satisfy you, the customer.