Donner Circle Looper Pedal Stereo Guitar Looper Effect 160 Mins 40 Slots Loop

Description

Specification:
Algorithm:              Maximum recording time of each track: 4 minutes, Maximum number of recording tracks in each slot: No limitation
Input Type:             Two 1/4'' unbalanced mono audio jacks, Impedance: 1 Megohm Maximum Input Level: 3dBu
A/D Conversion:    Sampling Rate: 44.1kHz, Sampling Accuracy: 24 bit, Dynamic: 103dB, Frequency: 20Hz~20KHz͵+0/-1 dB
Output:                  Type: Two 1/4'' unbalanced mono audio jacks, Impedance: 470 ohm. Maximum Input Level: 3dBu
A/D Conversion:    Dynamic: 106dB. Frequency： 20Hz~20KHz͵+0/-1dB
USB Type:            Type-B Micro USB
EXT CTRL:           Type: 1/4''TRS jack x1, Power Supply: DC 9V 300mA, Dimension: 99 x 121 x 56.5mm(W*D*H). Weight: 0.391KG. Accessories: Owner’s Manual
Connections:
1. Connect your instrument to the input of the Circle Looper.
2. Connect your amplifier or effects to the output of the Circle Looper.
3. Please connect a 9V DC (center negative) power supply to DC IN.
4. Make sure the current value is at least 300mA.
Package Include:
1 x Donner Noise Killer Guitar Effect Pedal
1 x User’s Manual
Product Introduction:
The Donner Circle Looper is part of the latest generation of Donner looper effects, created in response to the needs of our customers.
The unit has 44.1kHz and 24bit sampling, and a drum machine. There are 100 different drum grooves from 10 music styles and 10 types of metronome settings to choose from.
The display shows the duration of the current recording cycle and the loop mode (Record/Overdub/Play). You can add unlimited dub tracks.
This pedal has up to 4 minutes of recording time per track, 40 preset slots, and 160 minutes of total recording capacity.
1.Looper: Looper control.Select the position,volume level, and fade out time of the looper
2.Looper LED: Indicates current looper parameters
3.Display Screen
4.Rhythm LED: Indicates current rhythm parameters
5.Rhythm: Rhythm control. Select the rhythm type, speed, and volume level of the Rhythm playback.
6.Left Foot Switch: Record, dub, and tap tempo.
7.Merger Ctrl: Toggle whether the looper and drum machine work independently or simultaneously. Hold to delete recorded tracks.
8. Right Foot switch: Stop, Play
Please note: Power supply is not included
100 Different Drum Grooves
100 different drum grooves from ten styles of music as well as ten styles of metronome. Styles:POP/ROCK/METAL/FUNK/HIPHOP/LATIN/DISCO/BLUES/ JAZZ/FUSION/METRONOME Volume: Adjust the play volume level of the RHYTHM. The default value is 5,which corresponds to no attenuation or increase to the original signal. BPM: Show BPM(beats per minute) of the RHYTHM. The LED light above the left foot switch will blink to indicate the current BPM of the RHYTHM. Please refer to the TAP TEMPO section for BPM setting procedure.
Two Mono Inputs
There are two mono audio input jacks. (Connect both LEFT and RIGHT inputs to setup stereo input) EXT CTRL: Connect an external foot switch.
New Editor Software
Control the Circle Looper via editor software. Download and install the editor software and audio drivers. Connect Circle Looper to your computer via USB to access the editor software control. When connected to a computer, "USB connect” will be displayed on the screen. The Circle Looper can only be controlled by the software in this mode. Buttons and foot switches will not respond in this mode. You can download the software from the official website