Kawasaki ZX-14 Nitrous Oxide Kit Twin Bottles NEW!!

Description

This auction is for one new DynoTune
Dry Nitrous system for Kawaski ZX-14 motorcycles.Twin Bottle system for max performance and looks. Bottle Brackets will be SILVER and bottles will come in SILVER. This is a bolt on kit made for the ZX-14 bike.
SILVER BOTTLES AND BRACKETS FOR THIS AUCTION
Conatct DynoTune for other bottle and bracket colors
Checkout the custom twin bottle Busa video of this system below:
To see the Twin Bottle DynoTune Busa Video click here
Click here to see video of the bottles being removed and filled!
This DynoTune dry kit will add up to an additional 40HP to your Ride. Comes with eveything you need for a complete installation. This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power!  Comes with three jet settings of 15HP, 30HP, and 40HP. Will work with or without a power commander.You can go up to 80HP with special tuning.
This is a bolt on installation, no fabrication required! Comes with the black billet adaptors that mount the brackets to the bike.
Comes with Black twin 12oz bottles and Brackets. Kit Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation.
The Twin inlet system allows the user to configure the inlet any way they want. Single or dual snorkel intakes, its all in the kit! High Heat/Pressure teflon tubing inculded.
Note: In the Video, The Purge kit, V nozzle and braided line from purge solenoid are optional Items from DynoTune.
The Kit contains the following:
2 12oz SILVER powder coated Nitrous Bottles
2 SILVER Billet bottle mounting brackets
2 Custom mounting brackets to mount bottle brackets to Rear accessory hole.
2 two foot stainless bradied nitrous lines
175HP High flow Nitrous Solenoid
Solenoid mounting bracket with hardware
Twin mounting nozzles with mounts for dual snorkel intakes
High Pressure/Temperture Teflon Tubing (connects solenoid to nozzles)
"T" fitting and compression fittings
Nitrous bottle fill adaptor. Bottles simply twist off in seconds for the ulitmate in quick filling.
3 nitrous jets (NOS style) 15-30-40HP
Complete electrical kit with switches, wire, connectors and a complete manual showing how wire your horn or starter button as the activation switch.
NOTE: Old style bracket shown above. All the new brackets shown below
will have the larger round knobs. The knobs are much easier to turn, will not come off, and the brackets are thicker and stronger than ever! It comes with a Gauge port built into the side of the bracket (1/8" NPT threads) plus the standard outlet fitting on the opposite side. (Gauge sold separate) All new kits will come with this style bracket(s). Contact DynoTune for different color brackets and bottles.