-40%
MXR M303 Clone Looper - Open Box
$ 68.63
- Description
- Size Guide
Description
ProAudioStarDJ GEAR
INSTRUMENT GEAR
LIVE SOUND
RECORDING
MICROPHONES
HEADPHONES
ACCESSORIES
SOFTWARE
LIGHTING
BUNDLES
Authorized Dealer - Full Warranty
MXR M303 Clone Looper - Open Box
Looper Pedal
- Used -
Description
The long story.
The MXR Clone Looper Pedal is highly engineered for incredible sound quality, comes packed with features in a pedalboard-friendly housing, and can be as simple or complex as your needs dictate. Everything you expect from an MXR pedal, in other words.
Whether you’re practicing at home, captivating audiences with improv compositions onstage, or weaving intricate sonic tapestries in the studio, the Clone Looper Pedal has you covered. Just plug in, power up, and start recording an unlimited number of layers—up to 6 minutes long—that will be stored even when the pedal is off. A super convenient LED gives you a flashing 4 count to the beginning of the loop so you can keep your overdubs tight. Loops can be stopped and started in an instant, and your most recent layer can be undone just as fast. Run effects to your heart’s content—with storage sample rates up to 88.2kHz, so this little box will handle even high-gain distortion with ease. To keep your pre-loop signal intact, the MXR team also included an analog through-path. On top of that, the Clone Looper Pedal can be set for either buffered bypass or true bypass switching to accommodate your tone and signal needs.
The Clone Looper Pedal also comes packed with options for sonic explorers, from changing up the speed of your loop—to double-speed (3 minutes of recording time) or half-speed (12 minutes)—to reversing it entirely. Connecting an MXR Tap Tempo Switch to the CTR jack allows you to control all of these functions externally. The EXP jack provides further external control options when you connect a DVP volume pedal to adjust the loop’s output level or an MXR Tap Tempo Switch to engage Play Loop Once mode, which allows you to pull off smooth live performances and re-trigger your loop over and over again for DJ-style stutter effects.
Pedalboard-friendly and built like a tank, the Clone Looper Pedal is easier to use and delivers higher fidelity signal reproduction than any other looper of its type—hands down.
Basic Operation
Run a cable from your guitar to the M303’s INPUT jack and run another cable from the M303’s OUTPUT jack to your amplifier.Start with all controls at 12 o’clock.
To record your loop, tap the REC/DUB footswitch. The flashing red REC/DUB LED indicates that recording mode is active. Play for a desired length of time, and then tap the PLAY/STOP footswitch again to close the loop and start playback.
To add a new layer, tap the REC/DUB footswitch. The green PLAY/STOP LED will flash a 4-count to the beginning of the loop so that you can play your next loop in sync with the first. Press and hold PLAY/STOP
footswitch to clear the most recent layer.
To undo the last loop layer, press and hold the PLAY/STOP footswitch. Press and hold the PLAY/STOP footswitch again to redo the last loop layer if you decide that you want it back. To quickly clear the entire loop, press and hold REC/DUB switch.
Rotate the VOLUME knob clockwise to raise the loop’s output level or counterclockwise to decrease it.
The VOLUME knob’s push function can also be used to change the speed of the loop and reverse it. Press once for Half-Speed. Blue LED will illuminate in a steady state. Double-press for Double-Speed. Blue LED will illuminate in a flashing state.Press and hold to reverse the loop. Amber LED will illuminate in a steady state
To clear loop quietly, press and hold the VOLUME knob for 5 seconds. When the red REC/DUB LED flashes, press the REC/DUB footswitch within 5 seconds to clear the loop without it playing first.
Power
The Clone Looper Pedal is powered by the Dunlop ECB0039-volt adapter or the DC Brick, Iso-Brick, and Mini IsoBrick power supplies. This pedal cannot be powered by a battery.
Features/Specs
REC/DUB footswitch controls loop recording and clear loop quickly functions
VOLUME knob controls output level, loop speed, loop direction and clear loop quietly functions
PLAY/STOP footswitch controls loop playback and undo/redo functions
CTR jack allows tap switch to control loop speed, loop direction, and clear loop quietly functions
EXP jack allows expression pedal to set output level or tap switch to engage Play Loop Once modeInput Impedance : 1MΩ
Output Impedance : 100Ω
Maximum Intput Level : +5dBV
Maximum Output Level : +5dBV
Frequency Response : 20Hz to 20kHz
Noise Floor : -97 dBV
Sampling Rate : 44.1kHz
Current Draw : 225mA
Power Supply : 9volts DC
We are authorized dealers for all these brands. Click a logo to see our listings.
ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
We provide free shipping to the contiguous 48 United States, on most items.
Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
Please contact us for a Return Authorization before returning any items.